| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FRP Elbow Is A Light,High Strength, Corrosion-Resistant Pipe Fitting.Pipe Fittings Are A General Term For Components That Play The Roles Of Connection,Control,Direction Change, Diversion, Sealing, Support, Etc. In The Piping System.Steel Fittings Are All Pressure Fittings.According To Different Processing Techniques, lt ls Divided Into Four Categories, Namely, Butt-Welding Fittings (With And Without Welds), Socket Welding And Threaded Fittings, And Flanged Fittings.
The Main Purpose Is Mainly Used For The Connection Of Pipes And Pipes, Pipes And Equipment. In The Piping System, The Elbow Is A Pipe Fitting That Changes TheDirection Of The Pipe.
FRP Elbow Forming Process
The FRP Elbow Is Formed By Hand Lay-Up,And The FRP Elbow Formed ByFRP Hand
Lay-Up Has Three Structural Forms, Which Are Integral Molding On The Mold, Split Molding Of The Half Mold, And Shrimp Joint Bending After Prefabricating The Pipe.
1.The Overall Molding On The Mold Adopts The Existing Metal Or Glass Fiber
Reinforced Plastic Mold Below DN800 Of Manjike FRP,On Which The Raw Material Of E-DN250-45-1Glass Fiber Reinforced Plastic Is Integrally Formed By Manual Laying Process.
2. The Half Mold Is Formed Separately.On The Premise That The FRP Has No Relevant Elbow Mold. The Half Elbow Mold Is Made.After Making Two And A Half FRPElbows. The Two Are Spliced Into A Finished Elbow.
3. After Prefabricating The Pipe, The Shrimp Joints Are Bent And Formed. First, The FRP Pipe Of The Corresponding Specification Is Produced, And Then The Pipe Is Cut Into Several Sections And Spliced Into Elbows. This Forming Method Is Mostly Used Under The Condition That There Is A Certain Rigidity Requirement For The FRP Elbow,Or Under The Premise That There Is No Ready-Made Mold And The Cost Of Making The Mold Is Relatively High.
Features
-Strong Corrosion Resistance And Long Service Life;
-Has Excellent Chemical Corrosion Resistance;
-Strong Designability And Excellent Structural Performance
-Environmentally Friendly And Reliable,Light Weight
-Easy To Install Without Reducing Flow Rate.
Ruichuan is composed of Hebei Ruichuan FRP Co., Ltd., Hebei Ruichuan Chemical Equipment Manufacturing Co., Ltd., Ruichuan (Ningxia) Environmental Protection Technology Co., Ltd. And Jiangxi Ruichuan FRP Co., Ltd. It is a modern comprehensive equipment manufacturing enterprise specializing in the production of FRP products.
Our main products:
FRP tank(vertical,horizontal and field wound FRP tanks),
FRP pipe and fitting,
FRP tower and flue and chimney,
PTFE lined steel tank,
HDPE/PO lined steel tank,
HDPE/PO lined steel fitting,
PTFE lined steel fitting,
Glass lined steel fitting,
Stainless steel tank
FRP Flanges Have High Mechanical Strength,Strong Chemical Corrosion Resistance,Excellent Fire And Flame Retardancy, Low Thermal Conductivity,Small Expansion Coefficient, Good Temperature Resistance,Light Weight, Excellent Aging Resistance,Long Service Life, Convenient Installation, And Unique Designability.Frp Flange And Frp Pipe Fitting Is Manufactured By The Hand Lay-Up,Contact Molding And Spray-Up Process.In Hand Lay-Up And Contact Molding Processes Veil And Alternate Layers Of Mat And Woven Roving Saturated With Resin Are Applied On TheMold.In Spray-Up Process Continuous Strand Roving Is Fed Through A Chopper Gun,
Combined With Catalyzed Resin, And Sprayed Onto The Mould Surface.
1. Q: Are you Trading Company or Manufacturing Factory?
A: We are both manufacturer and trading company. We have our own factory for almost seven years, and we have better service of overseas customers. Welcome to send your inquiry!
2. Q: How about the Delivery time?
A: 60days after receiving the deposit based on the MOQ. Normally, 30-35days to finish the order for a 20ft
container. Welcome to ask for the detailed delivery time according to your order quantity!
3. Q: How can you guarantee the product quality?
A: We have the quality control system ISO9001:2015, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction beforepacking.
4. Q: What is about the payment terms.
A: Basically, the payment terms are T/T, L/C at sight. Western Union, Alipay.
5. Q: Can you do OEM for me?
A: We accept all OEM orders,just contact us and give me your design,we will offer you a reasonable price ASAP.
){kind=link}